yamaha hybrid tri-fuel generators

by US Carburetion Inc.

"The National Yamaha Hybrid Fuel Center"

News and Features

The Hybrids are here! Not adaptations...true multi-fuel operation.

1 carburetor

for

3 Fuels

Yamaha Generators ready to run on gasoline, propane, or natural gas.

We can't keep them in stock so place your order today!

end * * *

Hook-up Hoses and Quick Disconnects

	Super Heavy Duty Reinforced Rubber Hoses
	Working Pressure 350 psi. *
	Manufactured by Dayco®
	Male standard pipe thread ends
	Pressure tested to 420 psi (Pressure test certification available upon request).

Heavy duty 1/2" Gates® rubber hoses with male NPT pipe thread ends. Can be used for propane or natural gas. One end connects to the engine regulator the other end can be connected to the gas system by a pipe union or with a quick disconnect as listed below. Try to order a hose length that is as short as possible but will not require a pulling pressure on the hose connection.

1/2" Hoses

3' Hose	Can be used for all generators	Usually Stocked Item	$24.50	Add to Cart
4' Hose	Can be used for EF4000-EF6600	Usually Stocked Item	$27.00	Add to Cart
5' Hose	Can be used for EF4000-EF6600	Usually Stocked Item	$29.50	Add to Cart
6' Hose	Can be used for EF4000-EF6600	Usually Stocked Item	$32.00	Add to Cart
8' Hose	Can be used for EF4000-EF6600	Usually Stocked Item	$37.00	Add to Cart
10' Hose	Can be used for EF4000-EF6600	Usually Stocked Item	$42.00	Add to Cart
12' Hose	Can be used for EF4000-EF5200	Usually Stocked Item	$47.00	Add to Cart

1/2" Custom Hoses

Over 12' to any length

1/2" custom rubber hoses are billed separately and shipped by UPS factory direct and shipping charges cannot be calculated but usually work out to be no more than $20 for a very long custom rubber hose

$17.00 +2.50 per foot to 50' and $2.00 thereafter

Example: 32' hose

$17 + (32x $2.50)=$97

Example: 75' hose

$17 + (50x $2.50) + (25x $2.00) =$192

Order

3/4" Custom Hoses

Any length

3/4" hoses are billed separately and shipped by UPS factory direct and shipping charges cannot be calculated but usually work out to be no more than $20 for a very long custom rubber hose.

$27.60 + 3.00 per foot to 50' and $2.50 for foot thereafter

Example: 32' hose

$27.60 + (32x $3.00)=$123.60

Example: 75' hose

$27.60 + (50x $3.00) + (25x $2.50) =$240.10

Order

Copyright © 1995-2009 US Carburetion, Inc. If your question is not answered on our FAQ's page please email us. To e-mail us if using other than Microsoft IE and the link does not work please use this link.